zaterdag 3 december 2011

12 tags of Christmas - tag 3


Hallo allemaal,

Het is alweer de 3de dag van Tim Holtz 12 tags of Christmas. Hoe spannend is het om elke morgen even gauw te kijken wat hj nu weer bedacht heeft.
Nou de techniek van vandaag is er eentje die je op heel veel stempels kan toepassen. Ik heb vorig jaar zo'n stempelkussen gemaakt voor een kerststampel van zijn dennetak met een denneappel en ik kan er nog steeds mee stempelen!
Dus lees weer rustig wat hij gedaan heeft en ga lekker experimenteren. Laat een comment achter als je iets met deze techniek gemaakt hebt en we omen graag even kijken.

Alle producten die voorradig zijn vindt je in deze map: 12 tags of Christmas - TAG 3

Hier is de ingredientenlijst van Tim:
supplies: craft sheet, cut n' dry felt, distress reinkers (or any waterbased reinkers), distress ink pad/brushed corduroy, archival ink pad/jet black, glossy accents, perfect pearls mist/heirloom gold, ink blending tool, alcohol ink/red pepper, ink applicator tool, #8 kraft tags; kraft core; festive greenery die, christmas background & border texture fades; CMS117 seasonal silhouettes stamp, grid-blocks; sanding grip; paper distresser, scissors; twine, bell, bling-on-a-roll

Werkwijze:
step 1: select stamp to make custom pad for, and mount on clear block. gather a sheet of cut n' dry felt, and archival ink or any permanent ink pad.
Stap 1: kies een stempel waar je een eigen inktpad voor wilt maken, plak je stempel op een acrylblok, neem een vel Cut n'dry velt en Archival of  een andere waterproof inkt.

step 2: ink stamp and stamp on to fabric side of felt giving firm pressure. once you lift the stamp you'll need to clean the ink off of the stamp (or whatever your definition of cleaning a stamp is - we won't even go there now) *note: what i love about using grid-blocks to stamp with is not only the ability to see through them, but the etched grid lines allow me to stamp my image straight. if using a wood mounted stamp for this step, race around the block with a pen before removing it from the cut n' dry.
Stap 2: Inkt je stempel en stempel op de stoffenzijde van het Cut n'velt, druk stevig aan. Reinig de stempel. Het voordeel van de grid stempelblokken is niet alleen dat je er door heen kan kijken, maar door de gridlijnen kan je ook goed recht stempelen.

step 3: cut around image with sharp scissors.
Stap 3: Knip de stempelafdruk nu uit met een scherpe schaar. De Tonic schaar is daar ideaal voor.

step 4: select your assortment of water-based re-inkers and prep them by unscrewing each lid since we have to work rather quickly for this technique. i love to use distress for this technique not only for the color palette, but also for the eye dropper applicator. *note: it's important to use water-based inks for this only (not alcohol inks or pigment inks).
Stap 4; Selecteer de Distress re-inkers die je wilt gebruiken, schroef alle dopjes vast los omdat we best wel even moeten doorwerken met deze techniek. (note: Je kan dit allen doen met een inkt op waterbasis, geen permanante inkt of alcohol inkt dus)

step 5. begin "coloring" the stamped image using the reinkers by gently squeezing out ink over the black stamped area. it's not necessary to stay in the lines, but you do not need to "color" in any of the white area.
Stap5: begin met het inkleuren van je stempelkussen door met je pippet uit het flesjes lichtjes over het betreffende gedeelte te strijken van je stempelkussen.je hoeft de witte delen niet in te kleuren.

step 6: once the inks absorb into the felt they begin to spread out.
Stap 6: zodra de inkt in het vilt dringt gaat het zich verspreiden.

step 7: continue with the next color of reinker.
Stap 7: Ga door met de volgende kleur die je op je stempel wilt gebruiken.

step 8: continue until the entire image has been "colored" with re-inker, but remember don't bother inking the white areas of any image.
stap 8: Ga door tot de hele stempel gekleurd is. Denk er om, maak je geen zorgen om de witte delen.

step 9: the coolest thing about this cut n' dry felt material is the fact that as the inks begin to spread out, once 2 colors meet they will not cross-contaminate into each other...amazing!
Stap 9: Het mooie aan Cut n'velt is dat als 2 kleuren inkt elkaar gaan raken tijdens het uitspreiden zij niet vermengen maar naast elkaar in de pad blijven,

step 10: with a clean stamp place the stamp over the inked pad. using a grid-block it's easy to line up. *if you were using a wood mounted stamp you would simply stack the 2 shapes together since the felt would be cut to the size of the wood block.
Stap 10:Druk de schoongemaakte stempel nu op het zelfgemaakte stempelkussen. Als je de gridblock stempelblokken gebruikt kan je hem makkelijker uitlijnen op je kussen.

step 11: with firm pressure, begin pressing your stamp into the felt to work the ink into the pad as well as ink up the stamp.
Stap 11: Door stevig te drukken ga je je stempel inkten, maar tevens druk je de stempelinkt steviger in het kussen.

step 12: lift the stamp and check to make sure it's all inked up (it should be nice and shiny).
Stap 12: Neem je stempel van je stempelkussen en check of hij overal goed geinkt is. De stempel moet overal licht glanzen.

step 13: stamp the image on to a piece of white cardstock for your "test" sheet. now check that out - our image is now custom colored! you've created a custom stamp pad for that stamp. this pad can be used over and over again (usually 30-50 stampings off 1 inking). i love creating these pads for those stamps that i like to use, but don't like coloring over and over each time.
Stap 13: Stempel nu op een stukje cardsock. Zie je stempel is nu gestempeld en meteen gekleurd. je kan wel 30-50 keer stempelen met een geinkt kussen.

step 14: since this technique allows us to make "dozens & dozens", i have this trick to not only use this big background stamp on a tag, but to stamp 2 tags at once. i'm stamping on kraft tags (which i LOVE), and i begin by placing one tag on my craft sheet and place a piece of removable tape along the top edge of that tag (i use tissue tape). next i place my second tag on top of the first one and here's the trick...place the edge of the top tag against the reinforcer of the bottom tag (it has a little edge that will guide the top tag), and slide the top tag all the way across until it's reinforcer catches the side of the bottom tag. place a piece of tape on the bottom edge of that one.
Stap 14: Met de techniek die ik jullie nu wil laten zien plaats ik 2 tags op elkaar waardoor ik beide tags in een keer kan stempelen. de onderste tag plak ik af met masking tape. (Note: Kijk vooral even naar de foto op Tim zijn blog. dat verklaard een hoop)

step 15: ink stamp on your custom stamp pad and line the word "JOY" along the bottom left corner of the bottom tag and press firmly to stamp both tags at the same time. *note: this is where the grid-blocks really come in handy since you can use the grid line to line the stamp up horizontally and vertically.
Stap 15: Inkt je stempel op je eigengemaakte stempelpad en lijn het woord JOY uit op de linker onder hoek van de tag. Druk stevig aan. Let er goed op dat je de druk over de hele stempel verdeeld.

step 16: once you lift the stamp you'll you image on both tags.
Stap 16: Als je nu je stempel op tilt zie je dat je 2 tags tegelijk gestempeld hebt.

step 17: carefully lift the tags off the craft sheet and switch positions making the top tag the bottom now, etc. also be sure to move the tape, taping the bottom tag on the top, and top tag on the bottom.
Stap 17: Til voorzichtig de bovenste tag er af. Verwijder het masking tape. Wissel de tags om. (Note: let op dat de inkt wel droog is!) Masker weer zoals de eerste keer.

step 18: now ink up your stamp again and stamp the second time doing the same thing, lining up the word "JOY" along the bottom left corner of the bottom tag.
Stap 18: Inkt je stempel opnieuw in en stempel opdezelfde manier als de eerste keer.

step 19: lift them both off the craft sheet and zippity-doo you've stamped 2 tags at once! here i show the difference between types of tags to stamp on (left is manila, middle is the kraft, right is the kraft stained with picket fence distress stain).
Stap 19: Til nu voorzichtig je tags van je craftsheet en Voilá je hebt nu 2 achtergrond tags. Ik laat je nu nog even het effect op de verschillende ondergronden zien. Links is manila, het midden is craft en rechts is kraft gekleurd met Picket fence Distress Stain,

step 20: continue stamping all of your tags and as you do, you'll see that the inks will eventually cover the entire pad (filling up the white areas).
stap 20: Als je door gaat met stempele met je zelfgemaakte stempelkussen zal je zien dat uiteindelijk je hele stempelkussen door drngt zal zijn met inkt en dat er geen witte plekken meer over zijn.

step 21: once you're finished stamping, place your custom stamp pad in a zip-loc bag and adhere the test stamped paper to the bag. this way you can store your pad for months and months this way to use it again and again.
Stap 21: Als je klaar bent met stempelen plaats je je eigengemaakte stempelkussen meteen in een zip bag. Dat voorkomy ongelukjes en uitdrogen van je pad. je kan je pad nog heel veel keren gebruiken. ( note: Mijn eigen gemaakte pad is ruim en jaar oud en doet het nog prima.)

step 22: next place both tags into the matching embossing folder.
Stap 22: Plaats nu je tag in de bijpassende embossing folder.

step 23: run the tags through the vagabond or your embossing machine as shown. we are only embossing the top half of the tag! *note: i also have a video showing this technique for stamping and embossing in more detail in a video. check it out here...
stap 23: draai de embossingfolder met de tag door de vagabond of elke andere embossing machine. let op! we embossen alleen het bovenste deel. Tim heeft nog een uitgebreid filnpje hier over gemaakt, ga even naar stap 23 op zijn blog om het filmpje te bekijken.

step 24: drag a paper distresser along the edges of the tag.
Stap 24: Distress de randen van je tag met een paper distresser. (note: heb je die niet dan gaat het ook met een open gevouwen schaar. Let wel goed op, je kan je verwonden)

step 25: ink the tag using distress ink (brushed corduroy) with an ink blending tool.
Stap 25: Inkt de randen met je inkt blending toool en Disress inkt Brushed coderoy.

step 26: shake perfect pearl mists (heirloom gold) and mist inked tag.
stap 26: schud perfect pearl mist Heirloom gold en mist de tag.

step 27: dry the tag using a heat tool.
Stap 27: Droog je tag met een heat tool.

step 28: check out the vintage pearlized effect this gives the tag.
Stap 28: kijk wat een mooie parelmoer galns dit geeft op je tag.

step 29: die cut festive greenery die using various colors of kraft core paper and sand them (like we did on tag #1).
stap 29: Snij de Festive Greenery stans uit verschillende kleuren groen cardstock met kraft core. schuur de deeltjes op. Zie tag 1.

step 30: for the holly leaves, fold each leaf in half as shown.
stap 30: Vouw de hulst dubbel.

step 31: drag a sanding grip along the fold.
stap 31: Schuur de vouw lichtjes op.

step 32: ink the edges of all of the cut pieces using distress ink and an ink blending tool.
stap 32: Inkt alle randjes van de uitgestanste delen met gebruik van je Distress inkt en je inktblending tool.

step 33: i love the look that fold and sanding gives to the holly leaves.
Stap 33: i hou van de look die het schuren en distressen geeft aan de hulst.

step 34: separate the cut pieces into 2 piles (since we stamped 2 tags at once, we can embellish 2 at once also...see i told you this technique was efficient). i snipped the pine, mistletoe, and juniper in half and had a flourish and 2 holly leaves per pile.
Stap 34: Deel de diverse delen, aangezien we 2 tags gestempeld hebben hebben we ook 2 setjes stanzen nodig. ik heb de denneappel, mistletoe en de kersttak in tweeen geknipt en heb een swirl en 2 hulstblaadjes per tag.

step 35: adhere all of the paper pieces to the tag with glossy accents.
Stap 35: plak alle deeltjes op met Glossy Accent.

step 36: for a little accent to the tag i'm using "bling-on-a-roll" that i find at michaels. i've yet to see it anywhere else and love this stuff. it comes in so many different styles and colors, but of course i always buy the white since we can ink them ourselves.
Stap 36: Voor een kleinaccent op de tag heb bling op een rol gebruikt (plakstentjes. plakparels) Deze heb ik in het wit gekocht aangezien we ze zelf kunnen kleuren.

step 37: that's right, just apply a piece of felt to an ink applicator tool and drip on a few drops of alcohol ink (red pepper) to the felt.
stap 37: Tim heeft de plak bling/pareks gekleurd met alcohol inkt. je kan dat ook kleuren met je Copic of Flexmarkers. zolang het maar watervaste inkt is.

step 38: tap the inked tool over the bling to colorize it. the ink will dry almost immediately and you can go back over it to build up the color intensity.
Stap 38: Inkt zo vaak als nodig om eventueel de kleur te verdiepen.

step 39: since the inks dry fast and translucent, you can see the shine in the bling and the pearlescent in the pearls. my favorite part of this stuff is that everything is connected so no fussing with little pieces and tweezers!
Stap 39: doordat de inkt snel droogt blijft er ook nog iets te zien van de glans.

step 40: so just snip off how ever much you want to use and trim any excess adhesive off.
Stap 40. als je bling op de rol gebruikt heb knip je gewoon af wat je wilt gebruiken.

step 41: press them on to your tag. perfecto!
stap 41: plak ze op je tag.

step 42: for the top of the tag, tie a piece of ribbon through the hole, and thread on a bell on to some twine and tie a bow.
Stap 42: Voor de bovenkant van de tag, bindt een stukje lint door het gat en knoop er een belletje of bedel aan. Maak een strik.

step 43: to give the twine some shape, just wrap it around a pencil and heat it for about 10 seconds only.
Stap 43: Om het touw een beetje vorm te geven draai het touw om een potlood en verhit het even met je heat tool. laat het even afkoelen.

step 44: slide the pencil off and you have a nice spiral curl in your twine - nice trick huh? and like that, we're done...
stap 44: verwijder het potlodd en het touw heefet een fijne krul gekregen.

Dit was het weer voor vandaag! Ik ben benieuwd wat jullie met die eigen gemaakte stempelkussen gaan doen. Dit is helemaal ideaal voor stempels die je wel graag van kleur voorziet, maar die moeilijk met Copics of potloden zijn in te kleuren.
Veel plezier en tot morgen.

Ellen namens het team van Doe@ding.

Geen opmerkingen:

Een reactie posten

Disclaimer

Alle creatieve handelingen die u uitvoert naar aanleiding van informatie op onze website zijn geheel voor eigen risico. Doeading is niet aansprakelijk voor eventuele schades die voortvloeien uit door uzelf uitgevoerde handelingen die op ons blog worden beschreven.